Product Center
Large-scale manufacturers and suppliers of epoxy flooring materials in South China.
Main uses can be combined with water-based epoxy topcoats. Main characteristics: 1. Available in gray or red. 2. Water-based two-component epoxy primer, containing zinc phosphate, aluminum tripolyphosphate, and other active non-toxic anti-rust pigments and rust inhibitors. 3. Can form a tough anti-rust paint film. 4. Uses water as the dispersing medium, non-explosive, can be diluted and cleaned with water for painting tools. 5. No pollution during the construction process, with safety and environmental protection features. Main parameters: Solid content ≥ 50%. Dry film thickness: 60 microns (equivalent to 120 microns wet film thickness). Theoretical coverage rate: 6.67 square meters/kilogram. Mixing ratio: A:B = 9:1 (weight ratio). Thinner: Clean fresh water.
Performance Characteristics: 1. Strong coverage, good wear resistance, dust-proof, mold-proof, moisture-proof, and acid-alkali resistant. 2. Strong adhesion, good flexibility, easy to clean, maintain, and service. 3. Thin coating type, seamless, bright appearance, available in various colors, with good decorative and practical properties. 4. Easy to construct, economical flooring. Thickness is approximately 0.3~0.5mm, with a service life of 3-5 years. Applicable Range: Suitable for the coating of cement floors in various places such as electronics, electrical appliances, food, feed, tobacco, textiles, clothing, pharmaceuticals, chemicals, communication equipment, instruments, parking lots, exhibition halls, light industry, etc. Main Performance: Construction procedures and main...
Water-based self-leveling floor paint
Applicable places: Ground floors or basements without a waterproof layer, especially in places where odor control is required during construction, particularly suitable for the food and pharmaceutical industries. Functional features: Environmentally friendly, using water as a solvent, with no irritating odor; the paint film is breathable; seamless dustproof; excellent anti-mold and antibacterial properties. Main performance: Note: All tests (except drying time) are conducted after 7 days of curing (at 25°C). Construction procedures and main materials: Test item | Construction method | Main materials | Auxiliary materials Surface treatment | Grind the surface, repair defects, clean and dry | -- | -- Primer | Roll on epoxy primer | Water-based epoxy primer | - Mortar layer | Use epoxy intermediate material mixed with quartz | - | -